Provided Accessories; How To Attach The Lens Cap - JVC GR-D21 Instructions Manual

AC Adapter AP-V11E or AP-V13E
Power Cord
Lithium Battery*
CR2025
(for remote
control unit)
6
9 0
2 4 3
Remote
w 5 e
Control Unit*
T
W RM-V718U
* A battery is pre-installed in the Remote Control Unit
a time of shipment (with insulation sheet). To use the
Remote Control Unit, remove the insulation sheet.
NOTE:
In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core
filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.
To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.
NOTE:
To confirm the lens cap is on correctly make sure the cap is flush to the camera.
1
Make sure the arrow (L) is
pointing upward.
None

PROVIDED ACCESSORIES

or
Shoulder Strap
3
4
2
1 1
Pull out by inserting
a pointed instrument
Slot into the slot.

HOW TO ATTACH THE LENS CAP

2
Arrow
Battery Pack BN-V408U
Cable Adapter
Core Filter x 2
(for optional S-Video Cable and
Editing Cable provided with Remote
Control kit RM-V717KITU
for attachment)
Lens Cap
(See below for
attachment)
CD-ROM
Audio/Video Cable
(ø3.5 mini-plug to
RCA plug)
3
pg. 6
EN
5