Dubbing; Dubbing To Or From A Vcr - JVC GR-D21 Instructions Manual

Dubbing To Or From A VCR

To Use This Camcorder As A Player
1
Following the illustration, connect the camcorder
and the VCR. Also refer to pg. 15.
2
Set the camcorder's Power Switch
while pressing down the Lock Button
switch, turn on the VCR's power, and insert the
appropriate cassettes in the camcorder and the VCR.
3
Engage the VCR's AUX and Record-Pause modes.
4
Engage the camcorder's Play mode to find a spot
just before the edit-in point. Once it is reached, press
6
on the camcorder.
4/6
5
6
Press 4/6 on the camcorder and engage the
VCR's Record mode.
6
Engage the VCR's Record-Pause mode and press
6
on the camcorder.
4/6
7
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
NOTES:
● As the camcorder starts to play your footage it will appear
on your TV. This will confirm the connections and the AUX
channel for dubbing purposes.
● Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do, they are
being recorded onto the new tape.
● Set the video out select switch of the cable adapter as
required:
Y/C : When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not
accept Y/C signals and uses an audio/video
cable.
To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time
..... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen (
Or, press DISPLAY
turn on/off the date indication.
• Time Code
..... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 24, 25).
• Indications other than date/time and time code
..... set "ON SCREEN" to "LCD", "LCD/TV" or "OFF" in
the Menu Screen (
To Use This Camcorder As A Recorder
(GR-D31 only)
1. Set the camcorder's Power Switch
while pressing down the Lock Button
the switch.
2. Set "S/AV INPUT" to "ON" and set "REC MODE" to
"SP" or "LP" (
EN
26

DUBBING

y
to "PLAY"
t
located on the
pg. 23, 25).
k
on the remote control to
pg. 23, 25).
y
to "PLAY"
t
pg. 24).
3. Connect the cables as shown in the illustration and
load a cassette to record on.
4. Press the Recording Start/Stop button
engage the Record-Pause mode. "
appears on the screen.
5. Press the Recording Start/Stop button
recording.
6. Press the Recording Start/Stop button
engage the Record-Pause mode.
rotating.
NOTES:
● To use an output cable adapter (commercially available),
refer to its instructions.
● After dubbing, set "S/AV INPUT" back to "OFF".
● Analogue signals can be converted to digital signals with
this procedure.
● It is also possible to dub from another camcorder.
* When connecting the cables, open this cover.
** Connect when an S-Video cable is not used.
*** If your VCR has a SCART connector
To use this camcorder as a player ➝ use the provided
cable adapter.
To use this camcorder as a recorder (GR-D31 only) ➝
use a commercially available output cable adapter.
located on
%
rotates.
Connector
cover*
Audio/Video
To
)
cable
S-VIDEO
(provided)
S-Video cable
(optional)
Cable
Adapter***
VCR
w
to
"
A/V IN
w
to start
w
again to
%
stops
*
To AV
To AUDIO, VIDEO**
and S-Video
connectors
TV