Video Settings; Adjusting The Cutoff Frequency Value; Dvd Setup - Pioneer AVH-521EX Operation Manual

Adjusting the cutoff frequency value

You can adjust the cutoff frequency value of each speaker.
The following speakers can be adjusted:
[Standard Mode]: Front, Rear, Subwoofer.
[Network Mode]: High, Mid, Subwoofer.
NOTE
[Subwoofer Settings] is available only when [Subwoofer] is [On].
1
Press .
2
Touch then
3
Touch [Crossover] or [Subwoofer Settings].
4
Touch or
5
Drag the graph line to set the cutoff position.
6
Drag the lowest point of the graph to set the cutoff slope.
The following items can also be set.
Switches the subwoofer phase between normal and reverse position.
Switches the LPF/HPF setting to [On] or [Off]. When it is turned off, the high-pass
LPF/HPF
filter or low-pass filter of each speaker can also be turned on by touching the
graph lines.

Video settings

The menu items vary according to the source.

[DVD Setup]

This setting is available when the selected source is [Disc], [CD], [Video CD] or [DVD].
Menu Item
[Subtitle Language]*1*2*3 Set a subtitle language preference. When you select
[Audio Language]*1*2*3
.
to switch the speaker.
Description
[Others], a language code input screen is shown. Input the
four-digit code of the desired language then touch
Set an audio language preference. When you select
[Others], a language code input screen is shown. Input the
four-digit code of the desired language then touch
- 92 -
.
.