Table of Contents
Advertisement
en Basic settings
Basic settings
Basic settings
You can configure the appliance to meet your needs.
Basic settings
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Water hardness
Rinse aid dispensing
Intensive drying
Hot water
1
Factory setting (may vary according to model)
34
Display text
Selection
1
H04
H00 - H07
1
r05
r00 - r06
1
d00
d00 - d01
1
A00
A00 - A01
Description
Set the water softening system to
your water hardness.
→ "Setting the water softening sys-
tem", Page 24
Level H00 switches the water soften-
ing system off.
Set the amount of rinse aid to be dis-
pensed.
→ "Setting the amount of rinse aid",
Page 26
Switch the rinse aid system off with
level r00.
The temperature is increased during
the final rinse, which improves the
drying result. This may increase the
run time slightly.
Note: Not suitable for delicate items
of tableware.
Switch Extra Dry on "d01" or off
"d00".
Set cold water or hot water connec-
tion. Only set the appliance to hot
water if this can be prepared with
little energy and a suitable installa-
tion is available, e.g. solar heating
system with circulation line. The wa-
ter temperature should be at least
40 °C and max. 60 °C.
Switch hot water on "A01" or off
"A00".
Advertisement
Table of Contents
