Subscribe to Our Youtube Channel
Related Manuals for J.Burrows ASHFORD JBASHFMBBK
Summary of Contents for J.Burrows ASHFORD JBASHFMBBK
- Page 1 ASSEMBLY INSTRUCTIONS ASHFORD MEDIUM BACK MESH CHAIR JBASHFMBBK Weight capacity: 120kgs This design and instruction booklet is subject to copyright. 1 CTN www.officeworks.com.au For spare parts or hardware call (03) 9310 3011 or email hardware@kyvas.com.au...
- Page 2 20min (03) 9310 3011 NOTE • Please check you have all hardware before assembly. • If you are missing any hardware, please contact Kyvas on (03) 9310 3011 or email hardware@kyvas.com.au • Please ensure you have the name of the item, required hardware part and quantity. •...
- Page 3 6x20mm 6x30mm 6x40mm 3/10...
- Page 4 Note: Push the castors (H) firmly into hole at the end of each leg. Note: Turn the Star Base (G) upright and insert Gas Lift (E) into the center hole of Star Base (G). Place cover (F) over the Gas Lift (E). 4/10...
- Page 5 FRONT 4 Pcs ø 6x40mm used to complete this step. Note: Attach Backrest (A) to the Seat Cushion (B) using 4xScrews (K) with Allen Key (L). Fully tighten the screws with Allen Key (L). 6 Pcs ø 6x30mm used to complete this step.
- Page 6 2 Pcs ø 6x40mm used to complete this step. Note: Attached Armrests (C) to the Backrest (A) using 2xScrews (K) . Fully tighten the screws with Allen Key (L). FRONT 100% 4 Pcs ø 6X20mm used to complete this step. Note: Align the Seat Plate (D) so the FRONT of the Seat Plate matches the FRONT label on the bottom of the Seat Cushion (B) .
- Page 7 Note: Place assembled seat on the Gas Lift (E). Push down firmly until connection is secure. Your Ashford Medium Back Mesh Chair is now complete and ready for use. IMPORTANT NOTE: Periodically check and re-tighten screws. 7/10...
-
Page 8: Care Instructions
Care Instructions • Spot clean mesh/fabric with upholstery shampoo or dry cleaning powder only. • Do not saturate mesh/fabric. Apply proprietary cleaning products strictly according to instructions. Wipe dry immediately with an absorbent dry cloth. • Treat spills on PU material immediately with an absorbent cloth by blotting the spill. •... - Page 9 Ashford Medium Back Mesh Chair Functionality - To increase chair height pull lever upward while lifting body weight slightly off the seat. - Release lever at desired height. - To lower chair height sit fully into the chair and pull lever upward. - Release lever at desired height.
- Page 10 Warranty 3 years Product Warranty – valid for Australian customers only Officeworks Ltd warrants that this product will be free from defects and work as intended for 3 years from the date of purchase by the original customer. If the product has any defects or does not work as intended during the Warranty Period, Officeworks will, at its election and at its expense, repair or replace the product.
Need help?
Do you have a question about the ASHFORD JBASHFMBBK and is the answer not in the manual?
Questions and answers