Removing And Fitting Filter Silencer Or Air Suction Branch - ABB TPL76-C33 Operation Manual

Operation Manual / TPL76-C
8 Disassembly and assembly / 8.3 Removing and fitting filter silencer
or air suction branch
8.3 Removing and fitting filter silencer or air
Installing the air suction
branch
© Copyright 2018 . All rights reserved.
suction branch
Disconnect all air lines / ducts in accordance with engine builder's in-
u
structions.
Remove the insulation where necessary.
u
Loop the lifting gear around the air suction branch.
u
Unscrew the nuts (74027) and remove them together with their wash-
u
ers (74018).
Remove the air suction branch and set it down to one side.
u
Install the air suction branch in reverse order.
u
HZTL2485_EN Revision F April 2018