Surround monitoring systems
Fine tuning for perfect sound
5.1 Systems
The main monitor series monitor have been designed for
perfect multi-channel playback. The following diagrams
show the ideal layouts.
Room size and shape will often
TIP
force some loudspeakers to be placed closer or
further from the listening position than is ideal.
In such situations the time-alignment facilities of the
surround processor or monitor controller should be
employed to compensate.
The subwoofer carries the LFE signal as well as
TIP
the low bass from some, or all, of the main monitors
when bass management is being used. The subwoofer should be placed at the front of the
room, the optimal position providing the smoothest low bass without boomy or weak notes.
7.1 Systems
In a system capable of 7.1 Dolby
®
DTS
ES
™
or Blu-ray
or side channels) should be positioned at 100º, and the second set (rear or back channels) at
150º. (The front centre axis is 0º while directly to the rear of
the room is 180º).
The LFE input on the control1200 mixes the .1 effects/
TIP
LFE channel signal into the main monitors. Such is
43
their LF performance they are easily capable of
44
faithfully reproducing these frequencies
45
46
®
Dolby
Digital Surround EX
47
®
of Dolby
Laboratories. DTS
®
trademarks of DTS
Inc. Blu-ray
48
™
the Blu-ray
Disc Association.
49
50
®
Digital Surround EX
™
playback, there will be two sets of surround speakers. The first pair (surround
51
52
53
54
55
56
™
is a registered trademark
®
™
ES
are registered
™
is a trademark of
™