Related Manuals for NUTRICHEF NCICNUG
Summary of Contents for NUTRICHEF NCICNUG
- Page 1 NCICNUG Countertop Ice Maker Machine Electric Ice Maker Countertop with Ice Scoop & Basket, Includes Rear-mounted Hose Drainage...
-
Page 2: Important Safety Instructions
To ensure proper use of this appliance and your safety, please read the following instructions carefully before operating this appliance. IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of re, explosion, electric shock, or injury when using your ice maker, follow these important safety instructions: 1. - Page 3 13. DO NOT immerse any part of the product in water. 14. To disconnect, turn any control to “OFF”, then remove plug from wall outlet. 15. DO NOT plug or unplug product with wet hands. 16. Unplug the product before cleaning, maintaining and when not in use. 17.
-
Page 4: Control Panel
KNOW YOUR ICE MAKER Top cover Top cover Viewing window Ice tray Ice basket Front lid Power cord Power cord Front housing Front housing Ice basket Drain tube Ice spoon CONTROL PANEL Key/Indicator Function Start or stop the appliance. “Clean” key. The “Ice-making”... -
Page 5: Before First Use
BEFORE FIRST USE 1. Unpack the appliance, then check and make sure that all the accessories including ice basket and ice scoop etc. are complete. Please contact with the client service department if some accessories are missed. 2. Please ensure the ice maker is level and on a stable table or platform to avoid malfunction. - Page 6 8. The ice-making assembly is equipped inside of appliance, and the ice-making assembly will keep producing ice when the water is pumped into it. When the ice forms in the ice-making assembly, the ice cubes will be transferred into the ice tray and then the ice cubes will drop into the ice basket.
-
Page 7: Cleaning And Maintenance
CLEANING AND MAINTENANCE To keep your ice tasting fresh and your ice maker looking great, we recommend cleaning your ice maker at least once per week. 1. Remove the ice basket, add water and detergent into the water reservoir, then press and hold “Clean”... -
Page 8: Troubleshooting
TROUBLESHOOTING Problem Possible Causes Solution 1. Stop making ice, re ll water 1. Be lack of water. and then press “ON/OFF” key 2. The water screen at the bottom to restart ice-making cycle. 2. Remove the water screen at of water reservoir is blocked. ashes the bottom for cleaning. - Page 9 Problem Possible Causes Solution 1. Leave a 15cm clearance on all Poor ice-making 1. Poor heat dissipation. sides of the ice maker for result. 2. The water temperature is too proper ventilation. The ice-making 2. Fill the water reservoir with high.
- Page 10 Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com...
Need help?
Do you have a question about the NCICNUG and is the answer not in the manual?
Questions and answers