Table of Contents
Advertisement
Draining the condensation water
en
3.
Detach the condensation hose from
the connector.
The appliance comes
Note:
delivered with the condensation
hose already fitted to the connector.
4.
Place the condensation hose in the
"parked" position.
5.
Take the drain hose from the
accessories and push it fully onto
the free connector.
36
6.
Push the drain hose into the
appliance's hose guide.
Take care not to kink the
Note:
drain hose when doing this.
7.
Secure the other side of the drain
hose using the remaining
accessories, depending on the
connection situation.
Washbasin:
Siphon:
The connection point must be
secured using a hose clamp (12-
22 mm clamping range, available
from specialist retailers).
When connecting to a siphon, make
sure that the drain hose is routed at
a height of at least 80 cm, but no
more than 100 cm.
Advertisement
Table of Contents
