Notification signal
You can activate or deactivate the
notification signal at the end of the
programme. If you activate this setting,
an audible signal will sound once the
programme has ended.
Activate/deactivate the appliance
setting as follows:
Press Signal .
ü is shown/hidden in the display.
The notification signal at the end of
programme is activated/deactivated.
Note:
If a signal does not sound when
the programme ends even though the
notification signal is activated, you can
change the appliance setting.
~ Page 33
Altering the appliance settings
You can call up and change the
following appliance settings:
Volume of the audible notification
■
signals (e.g. at the end of a
programme)
Volume of the audible operating
■
signals
Spin speed used for spinning the
■
laundry before drying
Call up and change the appliance
settings as follows:
1.
Set the programme to position 1.
Appliance settings
2.
Press and hold Start/Reload . At the
same time:
3.
Set the programme to position 2.
4.
Release Start/Reload .
You can now alter the appliance
settings.
Adjusting the volume of the audible
notification signals
You can adjust the volume of the
notification signal emitted at the end of
the programme.
Adjust the appliance setting as
follows:
1.
Set the programme to position 3.
The current setting will appear on the
display.
en
33