EMC VNX VNX5200 Installation Manual page 45

Power up DAEs Power up DAEs
Ensure that the cabinet circuit breakers are still on and the PDUs are powered on. The DAE power Ensure that the cabinet circuit breakers are still on and the PDUs are powered on. The DAE power
cables should be connected directly to the PDUs as shown in cables should be connected directly to the PDUs as
also conveniently color-coded. Two colors identify the different zones (PDUs). Black power cables also conveniently color-coded. Two colors identify the different zones (PDUs). Black power cables
connect to PDU B, while gray power cables connect to PDU A. Once they are connected, the DAEs connect to PDU B, while gray power cables connect to PDU
will begin to power up. will begin to power up.
1. 1. Con
2. 2. Connect
3. 3. Con
4. 4. Connect
Figure re 24 Figu
Connect or ve nect or verify that th rify that the DAE 1 pow e DAE 1 power cab
Connect or verify th or verify that the DA at the DAE 1 pow
Connect or ve nect or verify that th rify that the DAE 2 pow e DAE 2 power cab
Connect or verify th or verify that the DA at the DAE 2 pow
PDU B PDU B
D D
B B
1 1 0 0
X4 X4 X4 X4
B B
24 Powering up the DAEs
Powering up the DAEs
shown in Fig
er cable is conn le is connecte
E 1 power cable er cable is conne is connected to PDU
er cable is conn le is connecte
E 2 power cable er cable is conne is connected to PDU
b b
A A
1 1
X4 X4
! !
C C D D
C C A A
Figur ure e 24. The DAE power cables are 24 . The DAE power cables are
A. Once they are connected, the DAEs
A A
ected to PDU A. d to PDU A.
B B
cted to PDU B. B.
C C
ected to PDU A. d to PDU A.
D D
cted to PDU B. B.
PDU A PDU A
C C
G G
4 4
b b
S S
A A
S S
0 0
X4 X4
! !
C C D D
C C A A
A A
Power up DAEs Power up DAEs
A A
35 35