A
D
UTO
RIVE WITH
PR515 and PR761 Hand Control Inside Arm Routing
To move the hand control from one side to the other, follow the instructions
below.
1. Lift the bottom of outside
back from the Velcro on
the arm cross rail.
2. Remove the hand control
wire from the J-Clip.
3. Unlock the extension
wire, and separate. Note:
This step disables all
lift chair functions.
4. Route the hand control
wire through the opposite
J-Clip.
5. Reconnect the extension
wire, and lock to secure.
T
-C
WILIGHT
ONTROL
J-Clip
13
O
PERATION
P-Clip
Extension
-
CONTINUED
Lock
Hand Control
J-Clip