Play From Bluetooth Devices; Control Playback; Bluetooth - Philips TAS1505 User Manual

4 Play from

Bluetooth

devices
With this speaker, you can listen to audio from
Bluetooth-enabled devices.
Note
The speaker can memorize a maximum of eight paired
devices. The ninth paired device will replace the first one.
Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
• To clear the pairing information, press and hold
5 seconds until you hear the prompt sound, and the
LED indicator blinks blue.
Keep away from any other electronic device that may
cause interference.
The operational range between this speaker and a
Bluetooth device is approximately 20 meters (66 feet).
Connect a device
1
Press for 2 seconds to turn the speaker
on.
The LED indicator blinks blue.
»
On your Bluetooth device, enable
2
Bluetooth and search for Bluetooth devices
that can be paired.
3 Select [Philips S1505] displayed on your
device for pairing and connection. If
necessary, input "0000" as the pairing
password.
»
4 Play audio on your Bluetooth device to start
streaming music.
Tip
for
·
You can use your Bluetooth device to control play.
LED indicator (blue)
Indicator
Fast blinking (2Hz)
Slow blinking (1Hz) Connecting
Solid blue
Disconnect a device
Disable Bluetooth on your device; or
Move the device beyond the
communication range.
»
Note
Before connecting another Bluetooth device, disconnect
the current device first.
Reconnect a device
When you turn on the speaker, it will reconnect
the last connected device automatically; If not ,
select [Philips S1505] on your Bluetooth device
to start connection.
After successful pairing and connection,
you'll hear the prompt sound, and the
LED indicator turns solid blue.
If you cannot find [Philips S1505] on
your device, hold down the Power
button for 2 seconds to power off
before rebooting, and long press it for
2 seconds to enter into pairing mode.
Bluetooth connection status
Pairing
Connected
The speaker beeps twice, and the LED
indicator blinks blue.
EN
5