Advertisement
Quick Links
Operation Manual
Tyre Wall Holder
51484
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 51484
Summary of Contents for WilTec 51484
- Page 1 Operation Manual Tyre Wall Holder 51484 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Please remember to put a M8 nut as a spacer between the bracket and the horizontal support. As- sembly the other main part, exactly like this first one. © by WilTec Wildanger Technik GmbH Item 51484 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
-
Page 4: Important Notes
4. Attach the round tubes: Insert tubes (4) into tubes (3), fasten them to the brackets (1, 2) with bolts (6), in the position that best supports your tyres. © by WilTec Wildanger Technik GmbH Item 51484 Page 4 http://www.WilTec.de http://www.aoyue.eu... - Page 5 Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 51484 Page 5 http://www.WilTec.de...