Advertisement
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Technical data
Size (㎜)
Width of holder (㎝)
Size of wheels (Zoll)
Max. number of wheels 4
Capacity (㎏)
Assembly instructions
1. First install the two main parts of this
folding tyre rack, as shown on the pho-
tos on the right. Connect the upright
support and horizontal support on their
end with two little brackets, using two
sets of M10×50 bolt and nut. You will get
an L frame. Join the connecting long thin
brackets using an M20 bolt and nut; af-
terwards connect this part to the L
frame, one end meeting the upright sup-
port and the other end meeting the hor-
izontal support. Please remember to put
a M8 nut as a spacer between the
bracket and the horizontal support. As-
sembly the other main part, exactly like
this first one.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
780–1370×730×705
81–122
12–18
130
Item 51484
Page 3
09
2021-1
Advertisement
