Grouped Stereo Source Considerations; General Settings - Garmin FUSION Apollo MS-WB670 Owner's Manual

Grouped Stereo Source Considerations

When selecting sources to play over the network, you should observe these considerations.
• A zone stereo, such as the Apollo SRX400, can create or join a group to control and play sources from other
stereos, but it cannot share its sources with the group.
• You cannot share an AirPlay source with grouped stereos. Using AirPlay 2 software, you can play content on
multiple stereos on the network, but the stereos must not be grouped
AirPlay, page 13).
• You can disable sharing on most sources by changing the GROUP ENABLED setting for the source. When
disabled, the source cannot be selected from a grouped stereo
• When audio sources are streamed over a data network, there is a slight delay in the synchronized audio that
may be noticeable if you are also using an external audio source.
◦ If you have a television with an Optical Out connection to a stereo and you continue to use the television
speakers, there will be a delay between the audio from the television speakers and the optical audio
streamed on the grouped stereos.
◦ If you synchronize a radio station and tune that same radio station on a non-networked stereo, there will
be a delay between the audio from the non-networked stereo and the audio from the radio station
streamed on the grouped stereos.
◦ You can remove this delay by changing the GROUP ENABLED setting for the source, but the source
cannot be shared with grouped stereos
NOTE: You cannot change the settings when a stereo is part of a group. You must remove the stereo from the
group before you can change any settings.
NOTE: When the stereo is in a group, you cannot change settings on that stereo.
Select > SETTINGS and select the name of the stereo.
NOTE: When a check box is filled, the option is on. When the check box is clear, the option is off.
DEVICE NAME: Sets a name for this device.
TUNER REGION: Sets the region used by the FM and AM sources.
This setting is also needed to configure DAB and SiriusXM sources
TELEMUTE: Sets the behavior of the mute function when the device is connected to a hands-free mobile
phone using the TELEMUTE wire on the wiring harness . When a call is received, the device can either mute
the audio or broadcast the call through the Aux input. See your hands-free kit instructions.
NOTE: This setting does not affect a phone connected to the stereo using Bluetooth technology.
POWER OPTIONS: Adjusts power settings, such as the power-save mode.
SEARCHING: Enables Fusion Alpha Search Technology (FAST), which allows you to quickly search for tracks
by letter or number. You can select a number to enable the FAST menu if your music device contains more
than the selected number of items.
ZONE: Enables you to configure the speaker zones
SOURCE: Allows you to enable, disable, and name the sources on the stereo
NETWORK: Enables you to configure the Fusion PartyBus network settings
UPDATE: Updates the stereo or connected devices
ABOUT: Shows the software version information for the stereo.

General Settings

(General Settings, page
General Settings
(Speaker Zone Settings, page
(Update Options, page
(Connecting an Apple Device Using
(General Settings, page
23).
24).
(Source Settings, page
(Network Settings, page
30).
23).
28).
28).
23