Congratulations on your latest Target purchase. Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time. Good luck –...
Target Corporation Toll Free at: 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday. Code: Yotrio 2018 before you begin 1. Check for damage or missing parts. Call 855-MYTGTHOME (855-698-4846) to order missing supplies.
Page 4
table of contents introduction hardware parts list assembly 7-12 QUESTIONS? Please call 855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have t h e style number and DPCI number r eady when calling.
ITEM DESCRIPTION QUANTITY right armrest left armrest chair back chair seat...
Page 7
step 01: (Part E)×1 (Part H)×1 (Part I)×1 washer allen wrench M6*20mm screw ATTENTION: To avoid damage to your new patio furniture, please use either the carton or another soft surface such as carpet as a working surface to prevent product damage during assembly. 1.
Page 8
step 02: (Part F)×2 (Part G)×2 (Part H)×4 (Part I)×1 M6*40mm screw M6*50mm screw washer allen wrench 1. Attach the seat frame (D) to the back frame (C) and right armrest (A) by lining up screw holes on the back frame (C) and right armrest (A) with corresponding screw holes on the back frame (C).
Page 9
step 03: (Part F)×2 (Part H)×2 (Part I)×1 washer M6*40mm screw allen wrench 1. Attach the left armrest (B) to the seat frame (D) by lining up screw holes on the rleft armrest (B) with corresponding screw holes on the seat frame (D). 2.
Page 10
step 04: (Part F)×1 (Part H)×2 (Part E)×1 (Part I)×1 washer M6*20mm screw M6*40mm screw allen wrench 1. Secure with M6*40mm screw (F) and washer (H) using allen wrench (I) on the right armrest (A) and back frame (C). 2. Secure with M6*20mm screw (E) and washer (H) using allen wrench (I) on the back frame (C) and left armrest (B).
Page 11
step 05 : (Part F)x1 (Part H)×1 (Part I)×1 washer allen wrench M6*40mm screw 1. Secure with M6*40mm screw (F) and washer (H) using allen wrench (I) on the left armrest (B) and back frame (C). Do not completely tighten screws until all screws are in place.
Page 12
step 06: 1. Tighten all the screws. 2. Turn the chair to upright position onto a flat, level surface. Put the cushion on the chair. You are now ready to enjoy your new chair.
Page 14
2018 Target. The Bullseye Design is a trademark of Target Brands Inc. All rights reserved.