Congratulations on your latest Target purchase. Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time. Good luck –...
Target Corporation Toll Free at: 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday. Code: Yotrio 2018 before you begin 1. Check for damage or missing parts. Call 855-MYTGTHOME (855-698-4846) to order missing supplies.
Page 4
table of contents introduction hardware parts list assembly 7-12 QUESTIONS? Please call 855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have th e style number and DPCI number r eady when calling.
ITEM DESCRIPTION QUANTITY chaise frame front wall back wall adjust lever...
Page 7
step 01: ATTENTION: To avoid damage to your new patio furniture, please use either the carton or another soft surface such as carpet as a working surface to prevent product damage during assembly. 1. Take out chaise frame (A), unfold left side wall and right side wall.
Page 8
step 02: (Part G)×4 (Part I)×1 (Part E)×4 washer M6*25mm screw allen wrench 1. Attach front wall (B) to side wall of chaise frame (A) by lining up screw holes on side wall chaise frame (A) with corresponding screw holes on front wall (B) Secure with M6*25mm screws (E) and washers (G) using allen wrench (I).
Page 9
step 03: (Part E)×4 (Part G)×4 (Part I)×1 M6*25mm screw washer allen wrench 1. Attach the back wall (C) to the side wall of the chaise frame (A) by lining up screw holes on the side wall of the chaise frame (A) with corresponding screw holes on the back wall (C). 2.
Page 10
step 04: 1. Insert the adjust lever (D) to the back of the chaise frame (A).
Page 11
step 05: (Part G)×4 (Part H)× 2 (Part J)×1 (Part I)×1 (Part F)×2 washer M6 nut M6*45mm screw allen wrench M6 wrench 1. Secure with M6*45mm screw (F) and washer (G) using allen wrench (I). 2. On the other side, secure with M6 nut (H) and washer (G) using M6 wrench (J).
Page 12
step 06: 1 Tighten all screws, including screws preassembled. 2. urn chaise lounge to upright position on a flat level surface. Put the cushion on the chaise. You are now ready to enjoy your new chaise lounge.
Page 14
2018 Target. The Bullseye Design is a trademark of Target Brands Inc. All rights reserved.