Download Print this page

Advertisement

Quick Links

CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
NOTICE
Please make sure that you have all parts indicated before you
begin assembly of this item.
Part List and Hardware List
PIECE
PICTURE
DESCRIPTION
Front legs
A
B
Rear legs
C
Table legs
D
Table glass
E
Table frame
F
Bench frame
G
Chair frame
Bolts
HW 1
06x25mm
Flat Washers
HW 2
016x1.0mm
HW 3
Allen key
QUANTITY
6X
6X
4X
1X
1X
1X
2X
32X
32X
2X
MODEL# PAT6757
Product dimension:
Bench: 51.8W x 27.6D x 28.4H (Inches)
Chair: 25W x 27.6D x 28.4H (Inches)
Table: 41W x 21D x 14.5H (Inches)
Weight Capacity: 704 lbs per bench & 55 lbs per table
Warning: do not stand on chair / bench & table
Warning: do not over torque bolts/screws
1

Advertisement

loading

Summary of Contents for Safevieh Outdoor PAT6757

  • Page 1 Dust regularly with small brush or vacuum. Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge. NOTICE MODEL# PAT6757 Please make sure that you have all parts indicated before you Product dimension: begin assembly of this item.
  • Page 2 PREPARATION Before beginning the assembly of the product, make sure all parts are present. Compare the parts with the package contents list and hardware contents list. If any parts are missing or damaged, do not attempt to assemble the product. ool required for assembly (included):Allen Key.
  • Page 3 PREPARATION Before beginning the assembly of the product, make sure all parts are present. Compare the parts with the package contents list and hardware contents list. If any parts are missing or damaged, do not attempt to assemble the product. Tool required for assembly (included):Allen Key.
  • Page 4 Step 1: Attach wood leg (3) to frame, using a & b. Loosen the bolt Step 2: Fully tighten using Key (c) after that put to balance the table first the glass on top table Step 3: Put all cushions on the chairs and bench...