Page 1
Dust regularly with small brush or vacuum. Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge. NOTICE MODEL# PAT6745 Please make sure that you have all parts indicated before you Product Dimension: 82.68”W x 29.13”D x 28.74”H begin assembly of this item.
Page 2
PREPARATION Before beginning the assembly of the product, make sure all parts are present. Compare the parts with the package contents list and hardware contents list. If any parts are missing or damaged, do not attempt to assemble the product. Tool required for assembly (included): Allen Key and Wrench.
Page 3
Step 4: Lift up the side (C) as shown the picture and put down to lock the Step 3: attach the back (A) to the seat (B) as shown on the picture. side on the seat (B) then can use this lounger same as this bench. Then use the Allen bolt L (G1) and the Allen bolt S (G2) and tighten by the Allen Key (G7) and wrench (G6) as shown on the picture.
Need help?
Do you have a question about the PAT6745 and is the answer not in the manual?
Questions and answers