Timer Operation; On/Off Timer Operation - Daikin FTXM50QVMA Operation Manual

ON/OFF TIMER Operation

NOTE
Notes on TIMER operation
• When TIMER is set, the present time is not displayed.
• When operating the unit via the ON/OFF TIMER, the actual length of operation may vary from the time entered by the user. (Maximum about
10 minutes)
In the following cases, set the timer again.
• After the circuit breaker has turned off.
• After a power failure.
• After replacing the batteries in the remote controller.
Timer functions are useful for automatically switching the air conditioner on or off
at night or in the morning. You can also use the ON TIMER and OFF TIMER
together.
To use ON TIMER with a 24 hour clock display
(24 HOUR ON/OFF TIMER)
• Check that the clock is correct.
If not, set the clock to the present time.
To set the ON TIMER in an hours remaining display.
•
1.
Press
"
" " blinks.
• " " and day of the week disappear from the LCD.
2.
Press until the time setting reaches the point
you like.
• Each pressing of either button increases or decreases the time setting by 10 minutes.
Holding down either button changes the setting rapidly.
3.
Press
• " " and setting time are displayed on the LCD.
• The TIMER lamp lights orange.
Display
To cancel ON TIMER operation
Press .
• " " and setting time disappear from the LCD.
• " " and day of the week are displayed on the LCD.
• The TIMER lamp goes off.
Page 10
.
" is displayed on the LCD.
again.

TIMER Operation

Page 10
20