Electrolux EW27EW55G S Specifications page 7

27" Combination Installation –
Built-In Microwave/Single Wall Oven
27" Combination Installation Specifications
Always consult local and national electric codes.
•
(Refer to product-specific electrical specifications on this page.)
Minimum 23-1/2" deep cutout dimension is critical for proper
•
combination installation, to ensure that each built-in product's faceplate
will fit flush against cabinet front.
Bases must be level and cabinet front must be square.
•
Minimum 4-1/2" required distance from bottom of Wall Oven cutout
•
to floor, 31" suggested.
Respect critical dimensions as noted for proper installation of built-In
•
products.
Minimum 21" clearance needed for Wall Oven door depth when open.
•
27" Built-In Microwave Specifications
Product Weight – 48 Lbs.
•
Voltage Rating – 120V / 60 Hz / 15 or 20 Amps
•
Connected Load (kW Rating) @ 120 Volts = 1.5 kW
•
(For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.)
Amps @ 120 Volts = 13 Amps
•
Full oven base of solid plywood or similar material required, capable of
•
supporting 100 Lbs.
Minimum 2-7/8" clearance required from bottom of Built-In Microwave
•
cutout to top edge of Wall Oven's faceplate, leaving a 2" visible gap
between both product faceplates.
Electrolux Major Appliances, N.A.
10200 David Taylor Drive Charlotte, NC 28262
USA
• •
CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4
• •
MOSS_EW 27INST EL 07/11
1-877 -4electrolux (1-877 -435-3287)
• •
1-800-265-8352 electroluxappliances.ca
• •
© 2011 Electrolux Major Appliances, NA
27" Electric Single Wall Oven Specifications
Product Weight – 150 Lbs.
•
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz
•
AC only electrical supply with ground required on separate circuit fused
on both sides of line.
Connected Load (kW Rating) @ 240 / 208 Volts = 3.4 / 2.6 kW
•
Amps @ 240 / 208 Volts = 14.2 / 12.6 Amps
•
Full oven base of solid plywood or similar material required, capable of
•
supporting 150 Lbs.
To adapt oven to fit cutout height between 27-5/8" and 28-1/4", add
•
one 2"-wide wood shim of appropriate height to each side of opening
under oven side rails. Lifting oven will hide larger cutout opening at
top and oven's 1"-high bottom trim will hide shims at bottom.
(Standard 1"- High Bottom Trim included.)
To adapt oven to fit cutout height between 28-1/4" and 30", optional
•
3"- High Bottom Trim available.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.com for detailed instructions.
electroluxappliances.com
High standards of quality at Electrolux Home Products, Inc. mean
we are constantly working to improve our products. We reserve the right
to change specifications or discontinue models without notice.
Printed in the U.S.A.