GE 29418 User Manual page 11

5. Set the RINGER 1 and RINGER 2 volume
switches located at the back of the base
to the desired loudness.
• HI = Default, loudest sound.
• LO = Sound will be the lowest.
• OFF = Telephone will not ring.
6. Set the TONE/PULSE switch to TONE if
you have Touch-Tone service or to
PULSE if you have rotary service.
7. Slip the mounting holes over the wall
plate posts and slide the unit down
firmly into place.
8. Plug one end of the coiled handset cord
into the handset and the opposite end
into the base.
9. Press Line 1 button if Line 1 telephone
cord is connected. Otherwise, press the
Line 2 button.
10. The unit is properly installed if you
pickup the handset and hear the dial
tone. Otherwise, recheck all installation
steps.
6
5
8
9
7
11