30" Combination Installation –
Built-In Microwave/Single Wall Oven
** Critical dimension –
30" Combination Installation Specifications
Always consult local and national electric codes.
•
(Refer to product-specific electrical specifications on this page.)
Minimum 24"deep cutout dimension is critical for proper combination
•
installation, to ensure that each built-in product's faceplate will fit
flush against cabinet front.
Bases must be level and cabinet front must be square.
•
Minimum 4-1/2" required distance from bottom of Wall Oven cutout
•
to floor, 31" suggested.
Respect critical dimensions as noted for proper installation of built-In
•
products.
Minimum 23-1/4" clearance needed for Wall Oven door depth
•
when open.
Electrolux Major Appliances, N.A.
250 Bobby Jones Expressway
USA
•
•
CANADA
5855 Terry Fox Way
Mississauga, ON L5V 3E4
•
•
MODD_EW INST 09/09
For detailed product dimensions
and installation specifications, refer
to model-specific product page and
installation guide on web
30" Built-In
Microwave Cutout
21"min.
21
1
/
"max.
2
For models:
E30MO75HPS
2"
E30MO75HSS
(visible
gap)*
30" Electric Single
Wall Oven Cutout
For models:
28
1
/
"min.
2
E30EW75GPS
28
7
/
"max.
8
E30EW75GSS
* Minimum 2
1
/
"
8
clearance required
from bottom of
31"
Built-In Microwave
suggested
cutout to top edge of
distance
Wall Oven's faceplate,
1
leaving a 2"visible
4
/
"
2
min.
gap between both
required
product faceplates.
MUST be applied
Augusta, GA 30907
1-877 -4electrolux (1-877 -435-3287)
•
1-800-265-8352
•
1
24"min.
30
/
8
4"
1
28
/
"min.
2
29"max.
C L
24"min.**
28
1
/
"min.
(critical
2
29" max.
dimension)
2" min.
Bottom cutout
edge must be
finish cut
30" Built-In Convection Microwaves Specifications
Product Weight – (E30MO75HPS / E30MO75HSS) 84 Lbs.
•
Voltage Rating – 120V / 60 Hz / 15 Amps
•
Connected Load (kW Rating) @ 120 Volts = 1.6 kW
•
(For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.)
Amps @ 120 Volts = 13.7 Amps
•
Full oven base of solid plywood or similar material required, capable
•
of supporting 150 Lbs.
Minimum 2-1/8" clearance required from bottom of Built-In Microwave
•
cutout to top edge of Wall Oven's faceplate, leaving a 2" visible gap
between both product faceplates.
30" Electric Single Wall Ovens Specifications
Product Weights – (E30EW75GPS) 178 Lbs. / (E30EW75GSS) 175 Lbs.
•
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz
•
AC only electrical supply with ground required on separate circuit fused
on both sides of line.
Connected Load (kW Rating) @ 240 / 208 Volts = 4.0 / 3.0 kW
•
Amps @ 240 / 208 Volts = 16.6 / 14.4 Amps
•
Full oven base of solid plywood or similar material required, capable of
•
supporting 200 Lbs.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
electroluxicon.com
•
electroluxicon.ca
•
© 2009 Electrolux Home Products, Inc.
" min.
120V/60Hz
grounded electrical
outlet should NOT
be located within
shaded area
6"
Full plywood base
required to support
18"
150 lbs.
4"x 4" opening
to route armored
cable
Full base required
to support 200 lbs.
3" max.
Electrical junction
box location
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Printed in the U.S.A.