Table of Contents
Advertisement
SEtting uP your MicroWAvE ovEn
1. Place the oven on a flat, sturdy surface and plug the cord
into a grounded outlet. Once plugged in, the display on your
oven will show:
If oven left untouched for about 10 seconds, display will
show :
Make sure there is adequate ventilation for your oven by leaving at least four inches
of space behind, above, and to the side of the oven.
2. Open the oven door by pressing the button below the control panel.
3. Wipe the inside of the oven with a damp cloth.
4. Place the pre-assembled ring in the indentation in the
center of the oven.
5. Place the glass tray on top of the ring so that the
three glass tabs in the center of the tray fit securely
into the tabs on the floor of the oven.
AMW83E-SB_XTC-03676C_EN.indd 9
your new microwave oven _9
2010-04-30
2:40:46
Advertisement
Table of Contents
