Table of Contents
Related Manuals for CyberPower OL6KRT2UTF
Summary of Contents for CyberPower OL6KRT2UTF
- Page 1 User’s Manual Step-Down Transformer OL6KRT2UTF OL8K10KRT3UTF OL6KRT2UTFHW OL8K10KRT3UTFHW CyberPower Systems (USA), Inc. 4241 12th Avenue East Suite 400 Shakopee, MN 55379 Phone: 877-297-6937 Fax: 952-403-0009 www.CPSww.com K01-0000212-01...
- Page 2 The CyberPower Step-Down Transformers support installation with power cord L6-30P (OL6KRT2UTF / OL8K10KRT3UTF) or hardwire (OL6KRT2UTFHW / OL8K10KRT3UTFHW), and are designed for a variety of CyberPower UPS systems. When combined with the UPS, the Step-Down Transformer converts voltage from 200-240V down to 100-120V.
-
Page 3: Hardware Installation
M5X12L screws at the front of the rack. The 2U Step-Down Transformer takes up position 2 through position 5. The 3U Step-Down Transformer takes up position 2 through position 8. CAUTION! The Step-Down Transformer must be installed above the power module. Copyright © 2011 CyberPower Systems, Inc. -
Page 4: Vertical/Tower Installation
CAUTION! Do not work alone under hazardous conditions. CAUTION! In case of the risk of electric shock, do not remove the top cover. CAUTION! The battery can energize hazardous live parts inside even when the AC input power is disconnected. Copyright © 2011 CyberPower Systems, Inc. - Page 5 SAFETY PRECAUTIONS CAUTION! Input and Output circuit breakers must be “OFF” during the building installation. CAUTION! The OL6KRT2UTF and OL8K10KRT3UTF with power cord L6-30P DO NOT require hardwiring. Use the attached power cord to connect to the UPS outlet. CAUTION! The OL6KRT2UTFHW and OL8K10KRT3UTFHW require them to be hard wired into the UPS. Only qualified maintenance personnel should perform this task.
- Page 6 HARDWIRING THE INPUT/ OUTPUT TERMINALS Step 3: Input configuration Insert the input cable through the appropriate cable gland (not included). Connect the three wires to the input terminal block. Copyright © 2011 CyberPower Systems, Inc.
- Page 7 Step 4: Fix the top cover on the bottom cover Tighten the five screws to fix the top cover on the bottom cover. Step 5: Connect the other side of the input cable to UPS output terminal block. Copyright © 2011 CyberPower Systems, Inc.
-
Page 8: Basic Operation
Provides battery backup and surge protection. They ensure power is OL6KRT2UTF provided to connected equipment over a period of time during a power failure. 6. Output Circuit Breaker (208Vac) Provides output overload and fault protection. OL6KRT2UTFHW OL8K10KRT3UTF OL8K10KRT3UTFHW Copyright © 2011 CyberPower Systems, Inc. -
Page 9: Technical Specifications
CAUTION! Before connecting to the UPS, check that the input voltage into the UPS is within specifications. CyberPower Systems Inc. www.cpsww.com © Entire contents copyright 2011 CyberPower Systems Inc., All rights reserved. Reproduction in whole or in part ® ® without permission is prohibited. PowerPanel Business Edition and PowerPanel... -
Page 10: Product Registration
If the Product is defective in material or workmanship, CyberPower will repair or replace it at CyberPower's expense, or, if CyberPower is unable to or decides not to repair or replace the Product (if defective) within a reasonable time, CyberPower will refund to you the full purchase price you paid for the Product (purchase receipt showing price paid is required). - Page 11 (collectively, "High Risk Activities"). CyberPower expressly disclaims any express or implied warranty of fitness for High Risk Activities or with aquariums. CyberPower does not authorize use of any Product in any High Risk Activities or with Aquariums.
-
Page 12: Conformance Approvals
Cet appareil numerique de la class A respecte toutes les exigencies du Reglement sur le materiel brouilleur du Canada. This document is believed to be accurate, but CyberPower reserves the right to change or correct the contents and does not assume any responsibility for omissions or errors.
Need help?
Do you have a question about the OL6KRT2UTF and is the answer not in the manual?
Questions and answers