Vinotemp Element EL-WCU103-02 Owner's Manual page 14

Power
7
To control the appliance turn on/off. To turn off the appliance, touch the
hold for at least 5 seconds. Press
readout will show the original temperature set previously when restart the appliance
or reconnect after power cuts .
Setting the Temperature Control
You can select temperature display setting from Fahrenheit to Celsius degree by
touching the °C/°F Selector mark. Fahrenheit or Celsius degrees indicator will appear
in blue color in the temperature display window. You can set the temperature as you
desire by touching the UP and DOWN marks.
 The temperature that you desire to set will increase 1°C or 1°F if you touch the
UP mark once, on the contrary the temperature will decrease 1°C or 1°F if you
touch the DOWN mark once.
 Temperature range : - 18°C/ - 65°F
 The temperature inside the unit will be appeared in blue color in the display
window.
Light switch positions are like the above picture showed to control the backlight turn on/off:
Orange backlight
①
② Blue backlight
When turn on Blue/Orange backlight at the same time, The color vary by optical action.
Don' t turn on the backlight synchronously for a long time, otherwise that cause raise the consumption.
Shelves
 To prevent damaging the door gasket, make sure the door is fully open when
pulling shelves out of the rail compartment.
 For easy access to the bottles stored, pull the shelves out approximatel
The shelves are designed with slider.
14
W
again, turn on the appliance. The LED
39
4
W W W . V I N O T E M P . C O M
mark and
y 90%.