Choosing The Display Language; Adjusting Input Sensitivity For Operation Keys - Brother 888-F42 Operation Manual

Choosing the display language

a Press .
b Select (Language) display.
Use the "-" or "+" key to choose the desired language.
c
d Press to return to the original screen.

Adjusting input sensitivity for operation keys

You can adjust the sensitivity of the operation keys to five
levels. Display the settings screen to set desired level.
1 Operation keys
a Press .
b Select (Input sensitivity) in the settings screen.
c Adjust the input sensitivity by pressing the "-" or "+"
key.
• The lower the setting, the less sensitive the keys will
be; the higher the setting, the more sensitive the keys
will be. The default setting is "3".
Note
• We recommend selecting the highest setting if
an electrostatic touch pen is being used.
• While adjusting the input sensitivity, press any of
the stitch pattern keys to check the sensitivity.
When the key responds, the setting value
indicating the sensitivity blinks.
■ If the machine does not respond when an
operation key is pressed
Turn machine off, then hold down
button) and turn on the machine to reset the settings.
Display the settings screen, and then adjust the settings
again.
1
LCD
(Thread cutter
Basic operations B-13
B