Table of Contents
Advertisement
INSTRUCTIONS GUIDE
A. The press must be placed on a stable and flat area.
B. Check the voltage (the voltage reference is 220V/50Hz) and connect the power cable to
the press (1).
C. Switch on the press (1), the screen is on (A).
D. The screen displays initialization.
E. To set the transfer temperature, click BRIEFLY on button « SET ». On the left screen you
see a value representing the programmed temperature. Press on "up and down" buttons to
increase or decrease the set temperature. When you chose the temperature, press again on
« SET » to validate it.
F. To set the pressing time in seconds, click BRIEFLY on button « SET ». On the right
screen you see a value representing the programmed time. Press on "up and down" buttons
to increase or decrease the set time. When you chose the time, press again on « SET » to
validate it.
6
S.A.R.L. au capital de 15 250 €
SIRET : 408 484 913 00012
APE : 514 S
R.C.S. CRETEIL
N° de TVA intra-communautaire : FR 13 408 484 913
Advertisement
Table of Contents
