Summary of Contents for Promattex PromaPress PromaShirt TS-4050ME
Page 1
Address: 7 bis, Impasse Denis Dulac 94700 MAISONS-ALFORT-PARIS FRANCE Phone: +33 141 79 00 45 - Fax : +33 141 43 53 93 57 Website : www.promattex-international.com - e-mail : info@promattexint.com S.A.R.L. au capital de 15 250 € SIRET : 408 484 913 00012 APE : 514 S R.C.S.
Page 2
USE OF PRESS PromaShirt TS-4050ME is an evolutive heat press for transfer on T-shirts and other supports. This is a single-station press with clam shell opening and manual closing of the heat plate. This press is equipped with a U-form stand allowing to pull easily on the lower plate all kinds of garment (T-shirts, bags etc).
TECHNICAL FEATURES PRESS TS-4050ME Weight netto 40 Kg Height (working position) 900 mm Depth (working position) 750 mm Width (working position) 420 mm Dimensions of lower plate 400 x 500 mm Voltage 220 V + Ground Power 2.2 KW Amperage 10 A Electronic temperature regulator with digital display Temperature range...
MAIN COMPONENTS 1 – Main switch 2 – Temperature and time control panels 3 – Closure handle 4 – Pressure adjusting screw (knurled knob) 5 – Heat plate 6 – Lower plate 7 – Screw for the remplacement of the lower plate S.A.R.L.
CONTROL PANEL A – Temperature display B – Time display C – Temperature setting buttons D – Time setting buttons S.A.R.L. au capital de 15 250 € SIRET : 408 484 913 00012 APE : 514 S R.C.S. CRETEIL N° de TVA intra-communautaire : FR 13 408 484 913...
INSTRUCTIONS GUIDE A. The press must be placed on a stable and flat area. B. Check the voltage (the voltage reference is 220V/50Hz) and connect the power cable to the press (1). C. Switch on the press (1), the screen is on (A). D.
PRESSURE SETTINGS G. Adjust the pressure screwing or unscrewing the screw (knurled knob - 4), pull down the heat plate with its handle (3), screw or unscrew the other knurled knob (5) so that it touches the surface of the support (6). H.
Page 8
KIT OF 4 LOWER PLATES (option) The kit of 4 plateaux can be used with your press PromaShirt TS-4050ME. You can buy it together with the press or later. Different formats of lower plates allow to print easily: short and long sleeves, pant legs, sport shorts, working clothing, bags, umbrellas etc.
Page 9
Once the basic plate removed, place the new plate on the press. The central hole of the stand is designed for the fixation screw. 2 other holes are designed for the bolt on the back part of the lower plate guaranteeing the strong fixation of the plate. Place the screw in the upper or left hole, depending on what orientation of lower plate you need.
CAUTION a. The press should be used carefully. b. Temperature level is very high, be carefully with skin burns. c. Pressure of the machine can be adjusted thanks to the closure handle. Pressure has been set from the factory and should not be changed while media is transferred. d.
GUARANTEE CONDITIONS Guarantee period starts from the day of the machine’s delivery to the buyer for 1 year for all the mechanic parts including resistances. Guarantee is strictly limited to our material, and against material and executive defects. The buyer is responsible for proving the appointed defects. Our responsibility is limited to the obligation to rectify or replace the recognized and defective parts for free without the possibility for the buyer to claim any compensation for any reason.
QUALITY CERTIFICATE Product name: Press TS-4050ME Serial N° of the press: This press is certified to be inspected and authorized for sale PACKING LIST 1 heat press TS-4050ME 1 cable of power supply 1 instructions guide For any technical advice or spare parts orders : Direct line : + 33 (0)1 41 79 00 45 S.A.R.L.