Aircare AURORAmini Instructions Manual page 6

6
5
6
The power light will glow green. Set your desired
mist output level by turning the knob to the right
(higher) and left (lower).
Note: For your first use, run your AURORAmini at full output until the
unit is empty. The power light will glow red when the AURORAmini is
out of water and mist output will stop until you refill the humidifier. The
nightlight will continue to glow even when the AURORAmini is empty.
7
of the AURORAmini.
• first press: the colors rotate
• second press: holds the current color
• third press: purple
• fourth press: blue
• fifth press: teal
• sixth press: green
• seventh press: yellow
7
• eighth press: orange
• ninth press: red
• tenth press: nightlight off
That's it! Your AURORAmini is ready to use.
Plug in your unit and turn the control knob
to the right to turn on the AURORAmini.
Select the nightlight color by
pressing the LED button on the front