Roland CDR-88RW-3 Manual page 13

608
• To avoid the risk of malfunction and/or
damage, insert only disks with
disk drive. Never insert any other type of disk.
Avoid getting paper clips, coins, or any other
foreign objects inside the drive.
***
• When you carry CDR-88RW-3, remove the
disk from the loading tray. Do not carry the
device with the loading tray downward.
***
• Avoid vibration and shock during operating.
Do not carry with the power on.
Handling Compact disc (CD-R/
RW/ROM)
***
• Upon handling the disks, please observe the
following.
• Do not touch the recorded surface of the
disk.
• Do not use at the places with dust.
• Do not leave the disk in the direct sunlight
or enclosed vehicle (proper temperature: 10-
15 degree centigrade).
***
• Keep the disk in the case.
***
• Do not keep the disk in the CD-RW drive for a
long time.
***
• Do not put a sticker on the label of the disk.
801
• Avoid touching or scratching the shiny
underside (encoded surface) of the disc.
Damaged or dirty CD-ROM discs may not be
read properly. Keep your discs clean using a
commercially available CD cleaner.
***
• Wipe the disk with a soft and dry cloth
radially from inside to outside. Do not wipe
along circumference.
***
• Do not use benzine, record cleaner spray or
solvents of any kind.
***
• Do not bend the disk.
Copyright
853
• Do not use this unit for purposes that could
infringe on a copyright held by a third party.
Roland assumes no responsibility whatsoever
with regard to any infringements of third-
party copyrights arising through your use of
this unit.
851
• Unauthorized recording, distribution, sale,
lending, public performance, broadcasting, or
the like, in whole or in part, of a work (musical
composition, video, broadcast, public perfor-
mance, or the like) whose copyright is held by
a third party is prohibited by law.
852a
• When exchanging audio signals through a
digital connection with an external instrument,
into the
this unit can perform recording without being
subject to the restrictions of the Serial Copy
Management System (SCMS). This is because
the unit is intended solely for musical
production, and is designed not to be subject
to restrictions as long as it is used to record
works (such as your own compositions) that
do not infringe on the copyrights of others.
(SCMS is a feature that prohibits second-
generation and later copying through a digital
connection. It is built into MD recorders and
other consumer digital-audio equipment as a
copyright-protection feature.)
Additional Precautions
***
• To create your original audio CD with Roland
VS series and CDR-88RW-3, you need an
internal IDE hard disk (HDP88 series).
552
• Unfortunately, it may be impossible to restore
the contents of data that was stored on a DAT
recorder or disk drive (hard disk, Zip disk,
etc.) once it has been lost. Roland Corporation
assumes no liability concerning such loss of
data.
553
• Use a reasonable amount of care when using
the unit's buttons, sliders, or other controls;
and when using its jacks and connectors.
Rough handling can lead to malfunctions.
556
• When connecting / disconnecting all cables,
grasp the connector itself—never pull on the
cable. This way you will avoid causing shorts,
or damage to the cable's internal elements.
557
• A small amount of heat will radiate from the
unit during normal operation.
558a
• To avoid disturbing your neighbors, try to
keep the unit's volume at reasonable levels.
You may prefer to use headphones, so you do
not need to be concerned about those around
you (especially when it is late at night).
559a
• When you need to transport the unit, package
it in the box (including padding) that it came
in, if possible. Otherwise, you will need to use
equivalent packaging materials.
216
* Zip is a trademark of Iomega Corporation.
217
* Iomega is a registered trademark of Iomega Corpo-
ration.
IMPORTANT NOTES
13