Installing Peak LE Before you install, you must read the included license agreement. The license agreement states the conditions under which Roland and other software companies allow you to use this software. Before running the installer, make sure to quit all other programs that your Macintosh may have been running.
Page 4
Macintosh Audio Applications CD-ROM 5. The Read Me dialog box will display the license agreement for using Peak LE, and recently updated information on Peak LE. After reading the contents, click [Continue]. fig.2-3.e_35 6. In the Install Peak LE dialog box, verify that the disk onto which you wish to install Peak LE is indicated, and click [Install].
This completes installation of Peak LE. Connecting the UA-30 Before starting up Peak LE, you should connect UA-30 to your computer and to the audio devices. For how to connect them, refer to the attached leaflet “UA-30 or MA-150U with MacOS”...
Macintosh Audio Applications CD-ROM fig.2-6a.e_30 2. Enter the following information into the Registration dialog box, and click [Register]. Name: Name of the person using the software Organization: Company or organization name (Or the name of the user) Serial: The serial number listed on the cover of this manual If you do not register Peak, you cannot receive your Product Authorization code.
Macintosh Audio Applications CD-ROM Open the Record Settings dialog box. Recording If you use a microphone to record, acoustic feedback (a whine or screech) may occur depending on the location of the microphone and speaker. If this occurs, take the following measures: •Point the microphone in a different direction •Place the microphone further away from the speakers •Lower the volume...
Page 8
Macintosh Audio Applications CD-ROM fig.2-6d.e_30 4. In the popup menu of the Sound dialog box, select Source, and set “Device” to “USB audio.” fig.2-6e.e_30 5. From the popup menu, select Sample and choose the recording quality. For CD-quality audio, select “44.1 kHz,” “16 bit,” “stereo.” fig.2-6f.e_30 6.
Macintosh Audio Applications CD-ROM 3. When you have finished playing, click 4. When a dialog box like the following appears, specify the location in which you want to save the file, input the filename, then click [Save]. fig.2-19.e_30 Editing Peak LE makes it easy for you to edit waveforms. Here is the basic procedure for waveform editing.
Macintosh Audio Applications CD-ROM Edit menu: Undo Cancel the effect of the previously executed command. Redo Re-execute the previously cancelled command. Cut the selected region and copy it into the clipboard. Paste Insert the data stored in the clipboard at the insertion point. DSP menu: Change Gain Increase or decrease the volume of the selected region.
Page 11
Macintosh Audio Applications CD-ROM * Please be sure to answer the question number 1 to 10 at least. The serial number is printed on the cover. fig.2-30_35 Register by mailing or faxing the attached card You can also register Peak by mailing or faxing the attached registration card. Fill the form and send the right side of the card to the address specified at the lower left side of the card.
Cannot record audio • In case you cannot record audio, there may be a trouble in the Apple sound manager. Set the sound manager once again following the step 1 to 11 in the leaflet titled “UA-30 or MA-150U with MacOS.”...
Need help?
Do you have a question about the UA-30 and is the answer not in the manual?
Questions and answers