Table of Contents
Advertisement
14
CORRECTING PROBLEMS YOURSELF
If the remedies below do not lead to a good result, contact an authorised GRUNDIG
dealer.
Please consider that problems can also be caused by external appliances, such as video
recorders and satellite receivers.
Problem
When switching on the TV set for
the first time, the menu for selecting already been set
the language not displayed.
Bright screen(noise or blue)
but no programme visible.
Low picture contrast.
No colour
Colours wrong, colour spots.
Sound unclear
Possible cause
Some of the TV channels have
Aerial cable.
Incorrect picture settings.
Problem is with the broadcaster.
Colour intensity is on minimum.
TV standard setting
(if setting possibility is available).
problem is with the broadcaster
Strong magnetic field from
speakers (or other).
Terrestrial magnetic field interference Change position of unit.
Sound setting.
____________
Remedy
ATS RESET: Turn off your TV set
using the main power button
and press main power and
L+
turn is not displayed button at
the same time and turn TV set
on and off again. Then turn
your TV seton again.
Aerial cable connected?
Check aerial system.
Change brightness, contrast, or
colour settings.
Test another channel.
Adjust color upward.
Select proper colour standard.
Test another channel.
Increase distance of speaker
to TV set.
With permanent colour spots,
switch off the TV set with the
mains switch and switch back
on after 10 minutes
Correct sound setting.
Advertisement
Table of Contents
