Download Print this page

ORIUM 11094 User Manual page 3

Austin digital, radio-controlled clock

Advertisement

Press "SET" to confirm your setting, exit setting procedures and return to the default
display.
For your information:
If you do not press a button for 30 seconds, the clock will automatically switch over from
setting mode to normal display mode.
Setting a daily alarm:
This clock has a daily alarm.
Hold the ALARM button down for 3 seconds.
The alarm time flashes (by default 00:00). Press the "UP" or "DOWN" buttons to set the
required alarm hour.
Press ALARM to confirm the setting. The alarm minutes flash. Press the "UP" or
"DOWN" buttons to set the required alarm minutes.
Press ALARM to confirm the setting and end the setting procedure.
Activation / deactivation of the alarm: in normal display mode, press the ALARM button
once, the "" icon is displayed above the seconds.
The alarm goes off for 2 minutes if you do not deactivate it by pressing any button. The
alarm will go off automatically every 24 hours.
Crescendo alarm (lasts for 2 minutes): the alarm signal accelerates.
Snooze function (alarm repetition):
When the alarm goes off, you can trigger the snooze function (it will go off 5 minutes later)
by pressing the "SNOOZE" button at the rear of the clock: "Zz" and "" will flash above the
seconds display.
The Snooze function can be turned off by pressing any other button
Display of the temperature in °C or °F:
The temperature can be displayed in degrees centigrade (°C) or Fahrenheit (°F). Press the
"DOWN" button briefly to toggle between the units.
There is a manufacturer's tolerance of ± 1°C
Display of the phases of the moon:
Your clock has a moon phase calendar
New Moon
Waxing Cresent
Full Moon
Waning Gibbous
.
First Quarter
Last Quarter
Importé par :
AIC International - 44980 Ste Luce sur Loire - France
Waxing Gibbous
Waning Crescent

Advertisement

loading