LG WFS1918EKD Owner's Manual page 29

Screw Type
Push the water supply hose up so that the rubber
Attach the water supply hose to the tap.
packing within the hose can adhere completely to
the tap.
Connect the water supply hose to the tap and then
2
Connect the water supply hose to the tap.
tighten it by screwing it to the right.
After connecting the hose, open the tap to check
3
Check water leakage.
for any water leakage.
Connecting Water Supply Hose to the machine
• Connect the water supply hose to inlet valve of
the washing machine, and then lock it by turning
the hose connecting part.
• Check to see if there is a rubber seal inside the
connector.
Water
tap
Rubber Packing
Water Supply Hose
Hose connector
Rubber seal
29