LG WFS1918EKD Owner's Manual page 21

T
UB CLEAN
If scrud is allowed to build-up in the machine it can result in stains on your clothes or unpleasant smell
in your washer.
Scrud is the way build-up that can occur within any washer when the fabric softener comes into
contact with Detergent, and according to particular degree of dirtiness or quality of water to be use, in
these case, use this program to clean inner tub and outer tub.
Press the POWER (AUTO OFF) button to turn power on.
Press the PROGRAM button to select the TUB CLEAN program.
2
Press the START/PAUSE button.
3
4
After 10 minutes of water supplement. Add the oxygenated bleach (about 300 m ).
• Do not use Detergent box.
• Do not place any laundry inside tub.
5
Close the lid.
NOTE
• Before using this program remove lint inside lint filter.
• When using this program, do not place any laundry inside tub.
• After using this program, remove dirt inside filter.
• After finishing this program, open the lid of wash to remove irritant odor.
• Do not pour bleach into the tub directly. It might cause damage the tub.
• Do not leave diluted oxygenated bleach inside tub for long time.
It rusts the tub must drain the remained diluted oxygenated water out.
• Use this program once for every month.
• Do not use this program repeatedly.
Automatic detection of time to clean Tub
• After Power On button pressing, if
• If you want to skip the Tub Clean, press option buttons to select desired cycle.
• After performing tub clean,
• Tub Clean time is detected automatically as per the usages of washer (Generally once after 30 usages)
• Left time is displayed.
• When the lid is open the machine will not operate, and an
alarm signal will remind you to close the lid.
is blinking in the display, it is the time for Tub Cleaning.
will disappear until next cleaning time.
21