Table of Contents
Advertisement
Basic operation
13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Turn the programme selector to a
▶
programme.
Note: The drum is lit up after the
door is opened and closed and once
the programme has started. The light
goes out automatically.
13.2 Setting a programme
Set the programme selector to the
1.
required programme → Page 30.
If necessary, adjust the pro-
2.
gramme settings → Page 43.
13.3 Adjusting the pro-
gramme settings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Note: Overview of all programme set-
tings:
Requirement: A programme has
been set.
Adjust the programme settings.
▶
The programme settings are not
saved permanently for the pro-
gramme.
13.4 Loading laundry
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the relevant
programme → Page 30.
Requirement: Prepare and sort the
laundry.
→ "Laundry", Page 39
Open the door.
1.
Ensure that the drum is empty.
2.
Separate the laundry and place it
3.
in the drum.
Basic operation en
43
Advertisement
Table of Contents
