Advertisement
USING DIFFERENT CLEANING MODES
USING DIFFERENT CLEANING MODES
SURFACE TYPE & OBJECT TO BE CLEANED
Laminated Floors
It is easier to clean the fl oor when slowly moving the fl oor cleaning nozzle. If you rub area
with piled up dirt or stain for two to three times, it will be removed. However, using the
product on a fl oor covered with laminate or vinyl for long time may cause deformation of the
fl oor due to its low heat-resistance characteristic.
Carpet/ Sofa
Please check cleaning instructions of your carpet before cleaning with steam. Clean the carpet
after removing the nozzle and set the power switch to ON . You can sterilize the carpet and
kill house dust mites just by steaming from a little distance.
Tile
Slowly move the nozzle to clean dirt on tiles. If you want to clean from edge to edge or
crevices, spray steam using the focused spray nozzle and gently swipe the area with a brush.
When cleaning in turbo mode, wipe remained water on the fl oor with dry dust cloth.
Stuffed Animals/ Toys, Etc
Please detach the nozzle and set the power switch to ON before using the product.
• Steamed inner nozzle may cause to 3 to 4 drops of hot water.
• Do not use turbo mode.
Hardwood Sealed Floor
Please do not steam on one spot since some woods cannot resist change in
temperature and humidity. Clean the fl oor with caution otherwise wood coating may be
removed as well.
9
Advertisement
