Advertisement
TROUBLESHOOTING
• Drill doesn't respond to trigger depression:
° Verify suffi cient air supply to drill.
° Check for moisture in air line and drill inlet.
• Drill performance is slow or sluggish:
° Verify suffi cient air supply to drill.
° Check for moisture in air line and drill inlet.
• Drill vibrates excessively during use:
° Stop use immediately and check for bent drill bit or arbor.
° Check for loose chuck retaining screw. (See maintenance section above for tightening
procedure).
• Drill emits excessive noise during use:
° Stop use immediately and add air tool oil directly to air inlet.
AVAILABLE ITEMS
• 12089 - Drill Bit Index
• 43656 - Step Drill Bits
• Spot Weld Cutters
The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com
PDF version of this manual is available online >> eastwood.com/30003manual
© Copyright 2013 Easthill Group, Inc.
If you have any questions about the use of this product, please contact
The Eastwood Company
US and Canada: 800.345.1178
Fax: 610.323.6268
263 Shoemaker Road, Pottstown, PA 19464, USA
Outside US: 610.718.8335
eastwood.com
Instruction part #30003Q
Rev. 2/13
Advertisement
