Camera Management; Lock A Camera; Unlock A Camera - WBOX Technologies WBXHD041S User Manual

Digital Video Recorder(DVR)
User Manual

5.1 Camera Management

5.1.1 Lock a Camera

On the camera management screen, check the locking status of network cameras in the
camera list on the right side. If the locking status of a network camera is
lock the camera manually.
Operation Steps
Step 1 Select a network camera to be locked in the camera list on the right side. The real-time
video and basic information of the network camera are displayed on the left side.
Step 2 Click the button next to Lock below the play window. The button turns blue and the
locking status is changed to
indicating that the camera is locked successfully.

Analog addresses directly connected to the DVR are locked preferentially and are
assigned the IP address 127.0.0.1. When channels of the DVR are insufficient for the
access of analog cameras, they automatically occupy the channels of network cameras.

If all channels of the DVR are bound to cameras, you need to unbind cameras that do not
need to be bound.

You can choose Click Add to automatically add cameras of all idle channels.

If a network camera is added, enter the username and password of the camera below the
play window. The video of the camera can be viewed only after successful login.

5.1.2 Unlock a Camera

Operation Steps
Step 1 Select a camera to be unlocked in the camera list on the right side. Information about
the camera is displayed below the play window.
Step 2 Click the button next to Lock below the play window. The button turns white and the
locking status is changed to
the camera is unlocked successfully.
If you click Clear, a message as shown in Figure 5-2 is displayed. Click OK to unbind
network cameras of all channels of the DVR.
26
in the camera list on the right side, click OK,
in the camera list on the right side, indicating that
Camera Management
, you can
Issue V1.0 (2018-06-04)