Startup - WBOX Technologies WBXHD041S User Manual

3 Operation Instruction
NO.
9
10
11
12
13
14

3.3 Startup

Before starting the DVR, ensure that the DVR is connected to a power supply.
When the DVR is connected to a power supply, it starts automatically upon the initial
power-on.

Ensure that a power supply is connected to the DVR correctly.
 Before starting the DVR, ensure that a monitor is connected to the HD-OUT or
VGA interface of the DVR correctly.

The DVR may not operate normally when a power supply exception occurs, likely
causing damage to the DVR in serious conditions. In such a circumstance, you are
advised to use a regulated power supply.
After the DVR is connected to a power supply, the power indicator is steadily on. Start
the DVR. The real-time video screen is displayed, as shown in Figure 3-5.
10
Name
LAN network
interface
USB
RS485
DC power
interface
Power switch
Ground screw
Description
RJ45 10 /100/1000 Mbps adaptive
Ethernet interface
Supports connection to a USB mouse, a USB
flash drive or USB removable hard disk.
RS485 port
Connected to an external power adapter
-(Optional for different DVR)
Safe ground screw of the device
Digital Video Recorder(DVR)
User Manual
Issue V1.0 (2018-06-04)