Color - Eizo FlexScan T565 User Manual

3-2. Color

By using the <Color Mode> in the <Color> menu, the adjustment mode can be
selected from standard mode (to set the color temperature), custom mode (to adjust
each color tone, (Red, Green and Blue)) and sRGB mode. These modes allow you to
adjust the color settings according to your preference.
<Standard> mode to set the color temperature
Temperature can be set from 4,000 K to 10,000 K, in 500 K increments.
(Including the 9,300 K default setting.)
<Custom> mode to adjust each color tone (Red, Green and Blue)
Adjust the
Change the <Color Mode> to <Custom>. The values shown in percentages (%)
for both the Cutoff and Gain are available only as a reference tool.
[Adjustment Procedure]
(1) First, set the monitor to maximum contrast and brightness.
(2) <Temperature> Set the color temperature that is close to the desired color.
(3) Adjust each color to become a uniform black level by using the <Cutoff>
function.
(4) Adjust each color to the desired white level by using the <Gain> function.
(5) Select <Save> and then press the Enter key.
(The adjustment data will be lost, if the monitor is turned off without saving
changes).
<sRGB> mode to select sRGB mode
During selecting the <sRGB>, color, brightness and contrast can not be adjusted.
Likewise, Fine Contrast Mode can not be changed by the AUTO/FINE MODE
button.
Set the <Temperature>.
<Gain> p.26) and <Cut off> p.26)
3. SCREEN ADJUSTMENT
.
15