Page 3
NO WEB ACCESS If you do not have access to the Web. Kindly register by completing the warranty registration form and fax it to the ANVIL office in the country of purchase. Failure to do so will invalidate your warranty.
Page 4
UNPACKING Unpack the product and check for any damage incurred during transit. This should be reported to the responsible carrier, railway or postal authority, and a request for a damage report should be made. THESE INSTRUCTIONS MUST BE FOLLOWED FOR US TO GUARANTEE OUR FULL SUPPORT OF YOUR CLAIM FOR PROTECTING AGAINST LOSS FROM CONCEALED DAMAGE.
POSITIONING DIAGRAM OPERATION HEATED DISPLAY MERCHANDISER MODEL: HDM0003 The Heated display merchandiser element, fans and lamps are controlled individually. The heating element is controlled by a thermostat, located on the control panel. The lamps and fans are switched on with rocker switches, also located on the control panel.
EXPLODED DIAGRAM HEATED DISPLAY MERCHANDISER WARNING MODEL: HDM0003 Burn Hazard. Do not touch hot food,liquid or heating surfaces while equipment is heating or operating Hot surfaces and food can burn skin. Allow the hot surfaces to cool before handling CLEANING AND MAINTENANCE INSTRUCTIONS 1.
Page 7
MODEL: HEATED DISPLAY MERCHANDISER WARNING MODEL CODE : HDM0003 Electric Shock Hazard. Part Description Keep water and other liquids from entering the inside of the equipment. Liquid inside the equipment could cause an electrical shock INSERT ALLUMINIUM TOP RACK Do not spray water or cleaning products. Liquid could contact the ALLUMINIUM BOTTOM RACK electrical components and cause a short circuit or an electrical shock.