Select And Start A Washing Programme - AEG FAVORIT 55420 User Manual

Programme
1) The appliance senses the type of soil and the quantity of items in the baskets. It automatically adjusts the
temperature and quantity of the water, the energy consumption and the programme time.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) This is the standard programme for test institutes. With this programme you have the most efficient use of
water and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test
information.
Consumption values
Programme
1) The display shows the programme time.
The water pressure and temperature, the variations of the mains supply and the quantity of
dishes can change the consumption values.

SELECT AND START A WASHING PROGRAMME

Starting the washing programme without delay start
1. Close the appliance door.
2. Activate the appliance.
3. Make sure that the appliance is in setting mode.
4. Set the washing programme.
• The programme time flashes in the display.
• The phase indicators of the set washing programme come on.
5. Press the Start button, the washing programme starts automatically.
• The phase indicators go off but the indicator of the phase in operation stays on.
Starting the washing programme with delay start
1. Close the appliance door.
2. Activate the appliance.
3. Make sure that the appliance is in setting mode.
4. Set the washing programme.
5. Press the Delay button again and again until the display shows the time of the delay
start.
Type of soil
Normal or light soil
1) Energy (kWh)
0,7 - 1,3
0,8
0,7 - 0,8
1,2 - 1,3
0,6 - 0,7
Select and start a washing programme
Type of load
Delicate crockery
and glassware
8 - 16
8
8 - 9
13 - 14
10 - 11
Programme description
wash 45 °C
Rinses
Dry
Water (litre)
15