Panasonic NN-DS596B Manual page 22

Auto Cook Setting (Method 1)
For menus No.23 - No.25 please operate as follows:
With Preheating:
1
Select Auto Cook Menu.
Turning the dial clockwise until the desired Auto Cook Menu Number appears in the display.
2
Press .
Press once to verify your selection.
3
Set Serving/Weight.
Set serving/weight by using the dial.
4
Press
Press once to begin preheating. "Preheat" will blink. After preheating, the oven will beep and the "Preheat"
will stop blinking, please put the food into the shelf position within 2 minutes, then close the oven door im-
mediately.
After preheating, the oven will beep 3 times, put the food into the oven immediately.
5
Press .
Press Start pad. The cooking time appears in the display window and begins to count down.
Notes:
When you select an automatic program, auto cook menu number and symbols (as shown below) will appear in
the display.
indicates the Wire Rack or Grill Tray should be used during cooking and placement of them.
*
indicates healthy menu.
*
(continued)
– 42 –
Auto Cook Setting (Method 2)
For quick selection, we classify menus No.1 - No.6 under Steam Auto pad. This method allows you to select
your desired menu directly by pressing Steam Auto pad.
For menus No.1 - No.6, please operate as follows:
Auto Steam menu:
1
Select Auto Steam Menu by Press
Continuously pressing the Steam Auto pad until the desired menu appears in the display.
2 Set Serving/Weight.
Set serving/weight by using the dial.
3
Press
Press Start pad. The cooking time appears in the display window and begins to count down.
Notes:
1. Fill the water tank before using the Steam feature.
2. For larger weights on the auto programs, it will be necessary to re-fill the water tank during cooking.
3. Do not cover foods on the auto steam programs.
4. Most foods benefit from a STANDING time after cooking on an auto program, to allow heat to continue
conducting to the centre.
5. To allow for some variations that occur in food, check that food is thoroughly cooked and piping hot before
serving.
6. When you select an automatic program, auto cook menu number and symbols (as shown below) will appear in
the display.
* indicates the Grill Tray should be used during cooking and placement of the tray.
(continued)
.
– 43 –