Advertisement
7
7A
7B
7 VALVE BODY ATTACHMENT
From above sink, insert Valve Body (7A) through Mounting Holes (7B). The
HOT valve, labeled with Red Tag (7C), should be positioned to the left side
of the spout.
8
8 VALVE BODY INSTALLATION
From underneath sink, place Mounting Washer (8B) onto Valve Shank (8A) and
tighten with Mounting Nut (8C).
7A
7C
7B
8A
8B
8C
ENGLISH
9
9 SECURING VALVE BODY
From underneath, tighten Mounting Nut (9A) by using Installation Tool (9B). For
better leverage, use a Screwdriver (9C), insert it through Hole (9D) and tighten
the Mounting Nut (9A) until Valve (9E) is fi rmly secured to sink.
10
10B
10A
10 HOSE CONNECTION TO SPOUT BODY
From underneath sink, push the Center Connector (10A) onto receiving Tube
(10B), until unable to push any further. Pull down on the quick connect housing
(10A). If the housing and the Inner Collet (10C) separate slightly but do not pull
off the receiving Tube (10B), the connection is secure.
3
9A
9B
9D
9C
9E
9A
9E
9E) is fi rmly secured to sink.
10A
10B
10A
9E
9E
9A
10B
10C
10A
Advertisement
