Operation - PAPILLON Power 43 Instruction Manual

cod. 54114
Please make sure the cutting head has been assembled correctly before use!
Note: The packaging material is made of recycle materials. Dispose of packaging materials in
accordance with regulations.
8. Fit the belt. According to picture showing, fit the belt well.

OPERATION

When operating this machine, please follow the instructions for operation steps
5. Filling with fuel
Danger of injury!
Fuel is explosive!
- Turn off and cool the motor down before filling the tank with fuel.
DANGER!
- You must observe all safety instructions relating to handing fuel.
Risk of device damage!
Before operating, you must fill it with fuel.
ATTENTION!
Never use oil for 4-cycle engine use or water cooled 2-cycle engine. If can cause spark plug fouling
exhaust port blocking or piston ring sticking. The oil to use is that for the 2-cycle air cooled engine.
Mixed fuels, which have been left unused for a period of one month or more may clog the carburetor or
result in the engine failing to operate properly. Put remaining fuel into an airtight container and keep it in a
dark and cool room.
Mix a regular grade gasoline (leaded or unleaded, alcohol-free) and a quality-proven
motor oil for air-cooled 2 cycle engines.
RECOMMENDED MIXING RATIO
GASOLINE 40: OIL 1
ATTENTION: use only 100% SYNTHETIC OIL when preparing the fuel mix.
Warning! Take care of the emission of exhaust gases.
Always shut off engine before fueling. Never add fuel to a machine with a running or
hot engine. Take care of fire!
.
21