MA grandMA3 Quick Start
Hide thumbs
Also See for grandMA3:
- Quick manual (133 pages) ,
- User manual (9 pages) ,
- Installation manual (6 pages)
Advertisement
Advertisement
Table of Contents
Related Manuals for MA grandMA3
Summary of Contents for MA grandMA3
- Page 1 Quick Start grandMA3 processing unit M, L, XL front panel 1. Internal command multi-touch screen 2. Power key 3. USB 2.0 (type A) grandMA3 processing unit M, L, XL rear panel 1. etherCON/RJ45 2. Power switch 3. powerCON TRUE1 4. USB 2.0 (type A)
- Page 2 4. Connect an external mouse or keyboard to the grandMA3 processing unit using the DMX ports. 5. Connect the grandMA3 processing unit with your PC, laptop, or a grandMA3 console using an etherCON/RJ45 connector. 6. Insert the powerCON TRUE1 plug into the corresponding socket.
- Page 3 2. Tap The grandMA3 device shuts down. 3. Set the power switch to position O. Important: You can disconnect the grandMA3 processing unit using the grandMA3 console or the grandMA3 onPC software. The DMX output will then be immediately interrupted.
- Page 4 The required installer is called grandMA3 Software x.x.x.x. 2. Extract the zip file and copy the folders EFI, ma, and the update.scr file into the root directory of your USB flash drive. 3. Insert the USB flash drive in the device's USB port.
Need help?
Do you have a question about the grandMA3 and is the answer not in the manual?
Questions and answers