Table of Contents
Advertisement
TROUBLESHOOTING
VEHICLE WILL NOT OPERATE
POSSIBLE CAUSE
Low battery voltage
Loose battery connections
Loose contactor connections
Loose electronic control box
connections
Required torque exceeds motor
capability
MALFUNCTION INDICATOR
TROUBLESHOOTING
The malfunction codes will blink on the controller. The code definitions provided
here are for informational purposes only.
If the indicator illuminates due to a minor issue such as a low voltage condition
or a sequence fault (reversing direction without releasing the accelerator),
select neutral and turn the key off and on to clear the error. If the error does not
clear, please see your POLARIS dealer for diagnosis and repair.
# OF BLINKS
1
2
3
4
6
7
8
13
TIP
CODE DEFINITION
Data or configuration error
Sequence fault
Power fault
Contactor issue
Throttle input error
Voltage protection
Controller or motor out of temperature range
Software fault
TROUBLESHOOTING
SOLUTION
Recharge the battery overnight
Check all connections and tighten
Check all connections and tighten
Inspect, clean, reinstall connectors
Apply the brakes and select low
range
107
Hide quick links:
Advertisement
Table of Contents
